Plik:OceanGate Titan schematic.svg

Treść strony nie jest dostępna w innych językach.
Ten plik jest umieszczony w Wikimedia Commons
Z Wikipedii, wolnej encyklopedii

Rozmiar pierwotny(Plik SVG, nominalnie 800 × 550 pikseli, rozmiar pliku: 26 KB)

Opis

Opis
English: Schematic providing overall dimensions of the Titan submersible designed and built by OceanGate. Titan is depicted in a side view, with the forward hatch to the left. The pressure hull consists of three major components: two hemispherical titanium end caps, joined to a cylindrical carbon fiber composite hull via titanium interface pieces which are bonded to the carbon fiber hull and bolted to the end caps. The composite hull and aft end cap are surrounded by a glass fiber composite shroud. There are two thrusters per side, one vertical and one horizontal. This drawing is to the scale of 1 pixel = 1 cm. Human figures, as drawn on the Pioneer 10 plaque, have been added for scale. According to the schematics on the plaque, the woman is 168 cm.

Overall dimensions (6.7 m long and 2.5 m high) are taken from the OceanGate specification sheet: Titan 5-Person Submersible | 4,000 meters. OceanGate. Archived from the original on June 22, 2023. Retrieved on June 20, 2023.

The dimensions for the cylindrical carbon fiber hull were taken from stated design specifications in a news article published by CompositesWorld: Sloan, Jeff (May 10, 2017). "Composite submersibles: Under pressure in deep, dep waters". CompositesWorld.

According to the Titan specification sheet, the thrusters are Innerspace model 1002. Thruster dimensions are taken from the manufacturer's website: Model 1002 series electric thrusters. Innerspace Thrusters. and the profile was simplified for graphical purposes. News photographs of the Titan indicate the thrusters were mounted directly to the fiberglass shell without fairings, although an earlier version (the hull was rebuilt after 2020) may have incorporated fairings for the vertical thrusters, as shown in an Everett Herald news article: Davey, Stephanie (March 9, 2020). "Titanic in reach as Everett's OceanGate works with NASA". Everett Herald..

The viewport is stated to be 15 inches in diameter and 7 inches thick. Petapixel states the diameter (presumably for the outside surface) is 21 inches: Growcoot, Matt (June 20, 2023). "Missing Titanic Submarine Regularly Used for Filmmaking and Photography". PetaPixel..
Data
Źródło Praca własna
Autor Mliu92
Inne wersje Ten plik jest pochodną pracą: Human.svg
Prace pochodne od tego pliku:  OceanGate Titan schematic nevernude.svg

Licencja

Ja, właściciel praw autorskich do tego dzieła, udostępniam je na poniższej licencji
w:pl:Licencje Creative Commons
uznanie autorstwa na tych samych warunkach
Wolno:
  • dzielić się – kopiować, rozpowszechniać, odtwarzać i wykonywać utwór
  • modyfikować – tworzyć utwory zależne
Na następujących warunkach:
  • uznanie autorstwa – musisz określić autorstwo utworu, podać link do licencji, a także wskazać czy utwór został zmieniony. Możesz to zrobić w każdy rozsądny sposób, o ile nie będzie to sugerować, że licencjodawca popiera Ciebie lub Twoje użycie utworu.
  • na tych samych warunkach – Jeśli zmienia się lub przekształca niniejszy utwór, lub tworzy inny na jego podstawie, można rozpowszechniać powstały w ten sposób nowy utwór tylko na podstawie tej samej lub podobnej licencji.

Podpisy

Dodaj jednolinijkowe objaśnienie tego, co ten plik pokazuje
Schematic providing overall dimensions of the ''Titan'' submersible designed and built by OceanGate.

Obiekty przedstawione na tym zdjęciu

przedstawia

image/svg+xml

Historia pliku

Kliknij na datę/czas, aby zobaczyć, jak plik wyglądał w tym czasie.

Data i czasMiniaturaWymiaryUżytkownikOpis
aktualny15:56, 13 lip 2023Miniatura wersji z 15:56, 13 lip 2023800 × 550 (26 KB)Mliu92Remove scaling lines for female figure.
00:02, 13 lip 2023Miniatura wersji z 00:02, 13 lip 2023800 × 550 (26 KB)Mliu92Tweaks to viewport shape & dimensions.
17:38, 27 cze 2023Miniatura wersji z 17:38, 27 cze 2023800 × 550 (26 KB)Mliu92Improved viewport integration
17:14, 27 cze 2023Miniatura wersji z 17:14, 27 cze 2023800 × 550 (26 KB)Mliu92Fix vertical dimension.
17:08, 27 cze 2023Miniatura wersji z 17:08, 27 cze 2023800 × 550 (26 KB)Mliu92Remove scaling lines for female figure.
17:07, 27 cze 2023Miniatura wersji z 17:07, 27 cze 2023800 × 550 (26 KB)Mliu92Detail improvements for titanium end cap thickness, added viewport, reduced human mask size.
20:19, 23 cze 2023Miniatura wersji z 20:19, 23 cze 2023800 × 550 (25 KB)Mliu92Fix math error in conversion of height.
16:58, 23 cze 2023Miniatura wersji z 16:58, 23 cze 2023800 × 550 (25 KB)Mliu92Removed stray lines used to scale human figures.
16:56, 23 cze 2023Miniatura wersji z 16:56, 23 cze 2023800 × 550 (25 KB)Mliu92Uploaded own work with UploadWizard

Poniższa strona korzysta z tego pliku:

Globalne wykorzystanie pliku

Ten plik jest wykorzystywany także w innych projektach wiki:

Metadane