Przejdź do zawartości

Plik:US 1ADSSI.PNG

Treść strony nie jest dostępna w innych językach.
Ten plik jest umieszczony w Wikimedia Commons
Z Wikipedii, wolnej encyklopedii

US_1ADSSI.PNG ‎(138 × 142 pikseli, rozmiar pliku: 8 KB, typ MIME: image/png)

Opis

Opis
English: 1st Armored Division Shoulder Sleeve Insignia[1].
Data
Źródło US Army Institute of Heraldry
Autor
English: United States Army
Licencja
(Ponowne użycie tego pliku)
Public domain
This image shows a flag, a coat of arms, a seal or some other official insignia produced by the United States Army Institute of Heraldry. It is in the public domain but its use is restricted by Title 18, United States Code, Section 704 [1] and the Code of Federal Regulations (32 CFR, Part 507) [2], [3]. Permission to use these images in the USA for most commercial purposes must be obtained from The Institute of Heraldry prior to their use.

Deutsch ∙ English ∙ فارسی ∙ 日本語 ∙ русский ∙ +/−

–
English: US Army Institute of Heraldry


Blazon:

Shoulder Sleeve Insignia

  • Description:
  1. An equilateral triangle, one point up, above a horizontal tab attached in base, the overall dimensions of triangle and tab is 4 1/16 inches in height and 3 7/8 inches in width.
  2. The triangle is divided into three sections, the upper section yellow, the dexter section blue and the sinister section red, overall a gun bendwise in front of a tank track and wheels all black surmounted by a red lightning flash bendwise sinister.
  3. In the apex the Arabic numeral "1" in black, all within a 1/8 inch green border.
  4. The tab is yellow with a 1/8 inch green border with the inscription "OLD IRONSIDES" in black letters 5/16 inch in height.

Combat Service Identification Badge

  • A silver color metal and enamel device 2 inches (5.08 cm) in height consisting of a design similar to the shoulder sleeve insignia.

Symbolism

  1. Yellow, blue, and red are the colors of the branches from which armored units were formed.
  2. The tank tread, gun, and lightning flash are symbolic of mobility, power, and speed.
  3. The division's designation is in Arabic numerals.

Background

  1. The shoulder sleeve insignia was originally approved without the tab on 1940-11-22.
  2. The tab was authorized as a separate item on 1956-02-21.
  3. The insignia was changed to a one-piece insignia on 1970-11-05.
  4. (TIOH Dwg. No. A-1-330)

Notes

  1. ↑ The Shoulder Sleeve Insignia is worn on all uniforms except the Blue Service Uniform.
    The Combat Service Identification Badge is a simplified miniature version of the SSI, and is worn on the Blue Service Uniform.

Podpisy

Dodaj jednolinijkowe objaśnienie tego, co ten plik pokazuje

Obiekty przedstawione na tym zdjęciu

przedstawia

Historia pliku

Kliknij na datę/czas, aby zobaczyć, jak plik wyglądał w tym czasie.

Data i czasMiniaturaWymiaryUżytkownikOpis
aktualny08:31, 28 lis 2005Miniatura wersji z 08:31, 28 lis 2005138 × 142 (8 KB)CORNELIUSSEONSHOULDER SLEEVE INSIGNIA. Description: An equilateral triangle, one point up, above a horizontal tab attached in base, the overall dimensions of triangle and tab is 4 1/16 inches in height and 3 7/8 inches in width. The triangle is divided into three sect

Żadna strona nie korzysta z tego pliku.

Globalne wykorzystanie pliku

Ten plik jest wykorzystywany także w innych projektach wiki:

Źródło: „https://pl.wikipedia.org/wiki/Plik:US_1ADSSI.PNG”