Plik:Candidate Drilling Target on Mars Doesn't Pass Exam pia18603-full 0.jpg
Rozmiar pierwotny (1024 × 1021 pikseli, rozmiar pliku: 614 KB, typ MIME: image/jpeg)
Plik Candidate Drilling Target on Mars Doesn't Pass Exam pia18603-full 0.jpg znajduje się w Wikimedia Commons – repozytorium wolnych zasobów. Dane z jego strony opisu znajdują się poniżej. |
Opis
OpisCandidate Drilling Target on Mars Doesn't Pass Exam pia18603-full 0.jpg |
English: Candidate Drilling Target on Mars Doesn't Pass Exam
This image from the front Hazard Avoidance Camera (Hazcam) on NASA's Curiosity Mars rover shows the rover's drill in place during a test of whether the rock beneath it, "Bonanza King," would be an acceptable target for drilling to collect a sample. Subsequent analysis showed that the rock budged during the procedure and did not pass the test. The image was taken during the 724th Martian day, or sol, of Curiosity's work on Mars (Aug. 19, 2014, PDT). The rover was doing a mini-drill procedure, which is part of evaluating the target in advance of full-depth, sample-collection drilling. One step in the procedure, called "start hole," uses the hammering action of the percussive drill to create a small indentation in the rock. During this part of the test, the rock moved slightly, the rover sensed that instability in the target, and protective software properly halted the procedure. After analysis of the target's instability, the rover team decided on Aug. 21, 2014, to drive Curiosity away from this Bonanza King site and resume the trek toward long-term destinations on the slopes of Mount Sharp and perhaps a shorter-term science destination at an outcrop called "Pahrump Hills." The site in this southward-looking image is at the northeastern end of sandy-floored "Hidden Valley." The largest of the individual flat rocks in the foreground are a few inches (several centimeters) across. For scale, the rover's left front wheel, visible at left, is 20 inches (0.5 meter) in diameter. A map showing Hidden Valley is at http://photojournal.jpl.nasa.gov/catalog/PIA18408 . NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, manages the Mars Science Laboratory Project for NASA's Science Mission Directorate, Washington. JPL designed and built the project's Curiosity rover and the rover's Hazcams. Credit: NASA/JPL-CaltechPolski: Kandydat na Obiekt Poddany Wierceniu na Marsie nie Zdał Egzaminu
This image from the front Hazard Avoidance Camera (Hazcam) on NASA's Curiosity Mars rover shows the rover's drill in place during a test of whether the rock beneath it, "Bonanza King," would be an acceptable target for drilling to collect a sample. Subsequent analysis showed that the rock budged during the procedure and did not pass the test. The image was taken during the 724th Martian day, or sol, of Curiosity's work on Mars (Aug. 19, 2014, PDT). The rover was doing a mini-drill procedure, which is part of evaluating the target in advance of full-depth, sample-collection drilling. One step in the procedure, called "start hole," uses the hammering action of the percussive drill to create a small indentation in the rock. During this part of the test, the rock moved slightly, the rover sensed that instability in the target, and protective software properly halted the procedure. After analysis of the target's instability, the rover team decided on Aug. 21, 2014, to drive Curiosity away from this Bonanza King site and resume the trek toward long-term destinations on the slopes of Mount Sharp and perhaps a shorter-term science destination at an outcrop called "Pahrump Hills." The site in this southward-looking image is at the northeastern end of sandy-floored "Hidden Valley." The largest of the individual flat rocks in the foreground are a few inches (several centimeters) across. For scale, the rover's left front wheel, visible at left, is 20 inches (0.5 meter) in diameter. A map showing Hidden Valley is at http://photojournal.jpl.nasa.gov/catalog/PIA18408 . NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, manages the Mars Science Laboratory Project for NASA's Science Mission Directorate, Washington. JPL designed and built the project's Curiosity rover and the rover's Hazcams. Credit: NASA/JPL-Caltech |
Data | |
Źródło | http://www.nasa.gov/jpl/msl/pia18603/#.U_o8NqNIUQs |
Autor | NASA |
Licencja
Public domainPublic domainfalsefalse |
Ten plik jest w domenie publicznej ponieważ został stworzony przez NASA. Polityka praw autorskich NASA stwierdza, że „materiały NASA nie są chronione prawami autorskimi, chyba że zapisano inaczej”. (NASA copyright policy lub JPL Image Use Policy). | ||
Uwaga:
|
Obiekty przedstawione na tym zdjęciu
przedstawia
22 sie 2014
image/jpeg
b98288a1c21dee2e6e34c0a6c54787fa90790c60
628 263 bajt
1021 piksel
1024 piksel
Historia pliku
Kliknij na datę/czas, aby zobaczyć, jak plik wyglądał w tym czasie.
Data i czas | Miniatura | Wymiary | Użytkownik | Opis | |
---|---|---|---|---|---|
aktualny | 21:34, 24 sie 2014 | 1024 × 1021 (614 KB) | Romkur | {{Information |Description= Candidate Drilling Target on Mars Doesn't Pass Exam This image from the front Hazard Avoidance Camera (Hazcam) on NASA's Curiosity Mars rover shows the rover's drill in place during a test of whether the rock beneath it, "B... |
Lokalne wykorzystanie pliku
Poniższa strona korzysta z tego pliku:
Metadane
Niniejszy plik zawiera dodatkowe informacje, prawdopodobnie dodane przez aparat cyfrowy lub skaner użyte do wygenerowania tego pliku.
Jeśli plik był modyfikowany, dane mogą być częściowo niezgodne z parametrami zmodyfikowanego pliku.
Orientacja obrazu | normalna |
---|---|
Rozdzielczość w poziomie | 72 punktów na cal |
Rozdzielczość w pionie | 72 punktów na cal |
Użyte oprogramowanie | Adobe Photoshop CS3 Windows |
Data i czas modyfikacji pliku | 07:48, 22 sie 2014 |
Przestrzeń kolorów | Nie skalibrowano |
Szerokość obrazu | 1024 px |
Wysokość obrazu | 1021 px |
Data i czas zeskanowania | 00:48, 22 sie 2014 |
Data ostatniej modyfikacji metadanych | 00:48, 22 sie 2014 |
Wersja IIM | 22 920 |